CT2

Weight Class: 0 - 2 Tons

Compacttilt™ CT2 is designed for excavators in the weight class 0 to 2 tons. The Compacttilt™ CT2 is unique in that it is both narrow and low in weight, which helps make it optimal for digging in narrow trenches.

Full 100º tilt angle (2×50) for versatile work.
Standard equipped with hydraulic quick change with pin-lock locking system.
Unique low weight of 30 kg incl. quick coupler and machine attachment, so that the machine retains its natural strength.
Developed for working in narrow grooves.
Measures only 148 mm in width, and can use 20cm buckets.

With the Compacttilt™ CT2, full utilization of the machine’s digging properties is achieved – even when space conditions are small. The attachment is produced for the specific machine and is available with S-change or 180º change.

CT2 Specifications

Specifications for Compacttilt machines

Data/Compacttilt Size	CT1	CT2	CT3	CT6	CT10
Guidance Max. Machine size	1,2T	2T	3T	6T	10T
Installation height from [mm]	160	170	200	235	250
Width [mm]	148	148	198	198	288
Length [mm]	174	200	313	302	372
Weight with quick coupler and machine attachment	15 kg	30 kg	36 kg	65 kg	95 kg
Total tilt angle	100º	100º	100º	100º	100º
Tilt angle	2x50º	2x50º	2x50º	2x50º	2x50º
Max. Hydraulic pressure [MPa]	220	250	250	250	250
Hydraulic flow [L/min]	2-4	2-4	3-6	4-12	6-14
Pressure open/close pin-lock [kN]	-	0,6	1	1	1
Torque [Nm ved 210bar]	2035	3165	4220	5655	9437
Type of quick coupler	S30-150, S30-180, MH30	S30-150, S30-180, MH30	S40, CW05, HS03	S40, Hydrema	Hydrema, S45
Maks. Digging torque [kNm]**	13,9	18,2	30,7	41,1	62,1
Maks. Breaking torque [kNm]**	6,9	12,3	20,6	31,1	38,4
**Max. Digging and breaking torque is calculated in relation to the following shovel size. Width height	500/500 mm	500/500 mm	600/800 mm	600/600 mm	600/950 mm
Change, incl. by default	Semi-automatic	Hydraulic	Hydraulic	Hydraulic	Hydraulic

VALVE HS2 SYSTEM FOR TILT

With this solution, we prepare our tilt to be built on the excavator, and it thus becomes “plug & play”.
– Efficient installation when the machine was born without locking hydraulics
– easy preparation, where it is avoided that the machine has to be built up to cope with the tilting function.
– Ensuring a uniform installation